Pine Tar Vitriol

Pine Tar Vitriol is a mixture of Genuine Pine Tar , Gum Turpentine and a gray pigment which gives the surface a color similar copperas. The warm gray color emerges gradually as tar natural brown color toned down. Pine Tar Vitriol gives a modern and nature-­gray color that also becomes water resistant and provides protection against UV-­ radiation. Contains 100% active ingredients.

Pine Tar is nature´s own wood protection and consists among others various kinds of resins and terpenes. Resins are the tree´s natural way of protecting themselves against micro-­organisms and heal injuries. Terpenes are a solvent and it accelerates the drying process. Pine Tar is produced of resin-­rich pine trees in furnace.

For best result apply Pine Tar Vitriol in warm weather, at least 10 degrees Celsius. The product becomes then easier to work with and it penetrates right into the timber. There should be no Gum Turpentine added. As pigment settles during storage, it is important to thoroughly stir the can before painting. Stir although occasionally during painting. Be aware of that Pine Tar Vitriol is a product of nature where the appearance may vary from different batches. If you have several cans of various productions (see white label on the cover), you should mix these together to avoid color differences. Pine Tar Vitriol shall not be withdrawn on wood previously treated with other solid colors Painting: Brush to remove dust, dirt and loose paint. Wash off algae and mold growth. The surface must be dry before painting. Paint directly without primer. Use a brush. Can also be sprayed. Recoat after about 1-­2 days. Paint 2 times for optimal protection and the best color. Ensure good ventilation. Painting outdoors. Material Safety Data Sheet will be found at www.auson.se and painting instructions at www.tjärlek.se.

For best result apply Brown Pine Tar in warm weather, at least 10 degrees Celsius. The product becomes then easier to work with and it penetrates right into the timber. Brown Pine Tar should be mixed with at least 20% gum turpentine. For easier penetration of planned wood such as timber facades, Brown Pine Tar should be further diluted with 10-­15% gum turpentine.

As pigment settles during storage, it is important to thoroughly stir the can before painting. Stir although occasionally during painting.

Be aware of that Brown Pine Tar is a product of nature where the appearance may vary from different batches. If you have several cans of various productions (see white label on the cover), you should mix these together to avoid color differences.

Brown Pine Tar shall not be withdrawn on wood previously treated with other solid colors

Painting:

Brush to remove dust, dirt and loose paint. Wash off algae and mold growth. The surface must be dry before painting. Paint directly without primer. Use a brush. You can also spray, dilute then by 10-­20% gum turpentine, depending on the used spray equipment. Recoat after about 1-­2 days. Paint 2 times for optimal protection and the best color.

Ensure good ventilation. Painting outdoors. Material Safety Data Sheet will be found at www.auson.se and painting instructions at www.tjärlek.se.

60590401/ 1-­lit can
60590473 / 3-­lit can
60590556 / 10-­ lit can